Custom Orders - Modifications to the bike (for example, aftermarket parts that may impact the lengths and/or fittings) will likely result in needing custom lines. Color options & changes to the cables require custom order. There is no return and no refund for custom orders.
Pricing - Estimated costs vary on the individual cable being quoted based on lengths, complexity and fittings used. Custom fees do apply and are considered no refund. Shipping is charged for returning your parts.
Production Times - There are two production times available: Regular or Rush (fee applies).
Regular Production usually is: 8-14 business days Busy-Season (Mid-January to Mid-September) 3-5 business days Off-Season (Mid-September to Mid-January) Rush Production usually is: 1 business day
Length changes to Barnett Part Numbers
The most common request we receive is for over or under stock length cables for various handlebar conversions. While we cannot tell you what length will work for each individual application, we can make the cables any length that you require. The simplest way to order custom length cables is to simply tell us how many inches over (+) or under (-) the stock length you need the cables to be and what type of casing you desire.
How to order for custom applications or applications not listed in catalog
If you are in need of a custom cable or a cable that is not listed in the Barnett catalog, you will need to do one of the following:
1. Send us your original cable(s) or 2. Submit a drawing using the custom measurement guide:
1) Send us your original cable(s), if possible. We will duplicate the cable per your instructions. We are located in the same city as Barnett, Ventura/CA. This means we are able to drop off and pick up cables direct at the manufacturer. We offer you special attention & consideration on each inquiry.
Please insure your package & send via US Mail to:
Cycle Brakes Custom Order PO Box 7334 Ventura, CA 93006
(Call for street address if using UPS or other courier.)
Letter to include in box: Specify in the clearest way possible what you need done to length of casing, length of inner wire, and/ or fittings. Include your NAME, PHONE NUMBER & e-mail address, Year/ Make/ Model of motorcycle, COLOR OPTION & what changes to make.
Use of Stock Cables Parts: Please specify if you authorize use of your stock cable parts. Barnett has a wide variety of elbows, ferules, and fittings but some OE parts are not available. Applications sent in will likely be chopped up if Barnett needs to reuse elbows from the stock line.
We will contact you with your quote including shipping and request payment info upon receipt of your cables & quote from Barnett.
2. Send us a detailed drawing of what you require. Be sure to include all measurements and specifications. Please refer to the Custom Cable Measuring Guide (below) to see exactly how to measure cables. Specify what type of casing that you desire.
Specity your Carburetor & Hand Controls: On Harley Davidson/Custom V-Twin applications, be sure to let us know what type of carburetor you are using and what type of hand controls (if other than stock).
Measuring Guide for Throttle/Idle Cables
|